New shorts from old jeans

What can be done in ten minutes? Not so much. For example, to watch a TV commercial with a piece of news, do not rush to drink coffee, take a shower in a hurry, assemble a tiny machine from Lego, light a fire from ready-made materials, change a punched car wheel on the spare tire ... And you can also sew new shorts from old trousers ! Thus, “kill several birds with one stone” in one fell swoop: to dispose of an unnecessary, but dear to you thing, to purchase a stylish new clothes for free, to save time searching for the right piece of clothing in stores. The main thing is that the new shorts will fit perfectly into your size. Materials for work: • Old denim pants - 1 pc; • Sewing machine, scissors, pins for skolki. Stages of work: The first stage: we cut off old pants. We measure the necessary length of future shorts on one leg (just bending over). The recommended length of denim shorts: just below the knee (or quite short, three to four centimeters below the line of the buttocks). Gently fold both leg trousers along the side seam and transfer the measuring line of the required length of the shorts to the second leg. We cut the unnecessary length, retreating two to three centimeters from the measurement line down the trouser leg (this is seam allowance).
 New shorts from old jeans
Similarly, we cut off the second leg .
New shorts from old jeans
The second stage: we form a hem of the bottom of the parts. To avoid shedding the edges of the fabric, we form a hem. To do this, along the perimeter of the entire trouser, we make the fabric bend inwards by about one centimeter. A prerequisite for correct bending is the alignment of the side seams of the main part and the hem (otherwise, after filing, the bottom will be wavy).
 New shorts from old jeans
Making another bend inside one and a half centimeters wide. It turns out a double hem, the crumbling edge of the fabric stays deep inside.
 New shorts from old jeans
We crack the bend with pins.In order to avoid the unevenness of bending or mixing seam lines, you can make a basting stitch with large stitches.
 New shorts from old jeans
 New shorts from old jeans
In the same way we process the edge of the second leg.
 New shorts from old jeans
Stage Three: stitch the hem of the pant legs. Place the sewing machine foot on the fabric so that it moves along the very edge of the bend.
 New shorts from old jeans
We make the seam as far as it goes in the thick side decorative seam (at this point the thickness is triple and the needle of the machine can not cope with it).
New shorts from article Aryh jeans
Raise the foot of the sewing machine and unfold the fabric by ninety degrees. We make several stitches (so that the needle does not reach the parallel edge of the bend by half a centimeter).
 New shorts from old jeans
Again, unfold the fabric ninety degrees.We set the typewriter foot so that it moves on the other edge of the bend.
 New shorts from old jeans
Stitch bend all the way into the thick side decorative seam from the back side . We repeat all the turns and make the line to the place where the bend was started.
 New shorts from old jeans
From the wrong side, a thick bend can be sewn to the base manually.
 New shorts from old jeans
That’s the job done! With the minimum of effort, the maximum result is obtained! Fast, easy, convenient. The main thing: stylish, because denim is a classic, which is always in fashion!
 New shorts from old jeans


Related News


The most delicious pizza
Tenderness Beaded Necklace
Why do men of the same age go to the young
PVC pipe screwdriver holder
Profitable credit card
How is hair aging
How to choose a satellite dish