How to make twisted wire from a straight

How can I annoy the charger wires that are always tangled. It is necessary to charge the phone and put the wire in the bedside table, as the next time the surprise is ready - the wire is tangled. I will show you how to avoid it and make it from an ordinary straight wire - twisted wire, similar to the wire of old telephone sets. It will be very convenient , because the wire itself will be lengthened as it is tightened, and it will fold itself into a kind of curl.
How to make a twisted wire from a direct
In this way, you can convert not only the wires from the chargers, but also any other, be it the cable from the computer or something else. What do we need?
necessary materials
All we need is:
  • - Straight cable or wire from the charger.
  • - Thick stud or another steel tube, can be without thread.
  • - Cable ties - you can use threads to secure.

Boil water

Take the most ordinary saucepan and pour it with ordinary water. The only thing is that the pan should be of such a size that our hairpin would fit into it and be completely submerged in water. Then put the pan on the stove. In the meantime, the water comes to a boil. "style =" max-width: 100%; " alt="How to make a twisted wire from a straight">
Using nylon cable ties, fasten the end of the wire to the beginning of the stud. See how it is done in the photo.


How to make a twisted cable from a straight
Next, tightly wind the cable onto the stud and fasten the second end with a second nylon tie. Do not pull the wire hard, but the load is still needed.

Cut the unnecessary

How to make a twisted wire from a straight
Excess pieces of the screed can be bitten off with pliers so that they do not interfere. And you can not do this, then it will be possible to get this construction from boiling water.

Heat treatment of the wire

How to make a twisted cable from a straight
Omit our winding into boiling water. Do not worry about the connectors, they will be nothing.But still keep in mind: that all the manipulations you do at your own peril and risk. We are waiting for about one minute. During this time, the water should boil and boil. As time passes, we pull out this thing. I tried to do this heat treatment with a building dryer. But I did not succeed almost. The wires eventually melted, but did not keep the shape of a twist. In the end, I realized that boiling is the thing. This process is easy to control and the probability of making a marriage is very small. So this is exactly my way.

Ready result

How to make a twisted wire from a straight After boiling, we obtain a twist. Give time to cool slightly. Bite off the screeds, release the cable and pull out the pin. We let the new curly wire dry. Next, check his work and enjoy an unusual craft. Now, for sure, nothing will mess with you.

Related News

How to stop blood from the nose at home
The time of smiles and fire in the eyes: a dozen selected jokes
How to mount MDF panels
61-year-old model from St. Petersburg shot in advertising underwear
How to apply the cream
Tattoo of the century